Filling level
Filling levels can be measured directly or indirectly in many ways using displacement sensors. The confocal principle is usually applied for liquids in doing so. The filling level measurement for solids is comparable with a distance measurement. Micro-Epsilon makes many different options possible due to the extensive range of different sensors.
Biogas plant filling quantity
The filling quantity in the fermenter of a biogas plant can be determined using the expansion of the gas tank. This is important in order to assure a constant gas flow to the combustion engine. Draw-wire ...
הראה פרטיםFilling level
A filling level measurement situation can arise with a liquid substance as well as with dry, bulky goods. The precise measurement of liquid levels is difficult to achieve, nevertheless, the confocal measuring ...
הראה פרטיםLiquid level
Precisely measuring the level of liquids is known in measuring technology as difficult to achieve. Nevertheless, the confocal measuring technique is suitable as a very good solution for this problem. Light ...
הראה פרטיםFilling level
A filling level measurement situation can arise with a liquid substance as well as with dry, bulky goods. The precise measurement of liquid levels is difficult to achieve, nevertheless, the confocal measuring ...
הראה פרטיםLiquid level in falling film reactors
In falling film reactors used by the chemicals industry, the geometrical dimensions of the reactor metal sheet are measured using confocal sensors. The filling level of the liquid is also measured during ...
הראה פרטיםLiquid Aluminium Level Measurement
To obtain a homogeneous oxide-free aluminium cast, the aluminium level in the open mould must be kept constant to within 1 mm or better. A constant level is achieved by controlled tilting of ...
הראה פרטיםFill level measurement in oil temperature sensors (OTS)
After the oil has been filled by a dispenser machine, an ILD1420-200 measures the level. If this is less than 4 mm or if the sensor was not filled at all due to production errors, it is evaluated ...
הראה פרטיםמדידת רמת נוזלים של גלמי אלומיניום
במפעלי יציקת אלומיניום, חומר היציקה נמזג ליצירת מטילים קטנים, הידועים כגלמים. מפלס הטעינה בתהליך ההרכבה הוא קריטי ...
הראה פרטיםFill level measurement
For smooth production and logistics processes, precise quantity measurements at storage locations for bulk goods or plastic granulates, for example, is a decisive factor. In order to avoid production downtime ...
הראה פרטיםHeight measurement of Petri dishes
In microbiology, cell cultures are used for the analysis of so-called agar plates. The agar plate should be consistently as high as possible - this is a critical factor for later evaluation of the cell ...
הראה פרטיםLiquid level measurement during capacitor production
The capacitors must be dipped into a bath of solvent during the capacitor production. In doing so, it is important that the blanks only have a specified immersion depth. Confocal chromatic sensors are ...
הראה פרטיםFilling level measurement on a barrel pump
For this measurement task, the barrel stands on the platform of the hydraulic press. There is one hydraulic cylinder each on the left and right. Both cylinders are connected to each other by a cross beam. ...
הראה פרטים